Professional Auto Repair Services Greenville SC

We provide a wide range of automotive services from full auto repair to complete vehicle preventative maintenance services. We specialize in Honda, Acura, Toyota and Lexus Vehicle repairs in the Greenville SC area. Below is a list of all our professional automotive services.
Pre Maintenance Minder Models
OIL CHANGE SERVICE
We recommend at 3,750 mile increments
- Change engine oil and filter
- Check and top off all fluids
- Inspect tires and inflate to proper level
- Check operation of exterior lights
- Inspect external drive belts
- Lube door hinges
|
MINOR SERVICE
We recommend at 7,500 mile increments
- Change engine oil and filter
- Check operation of exterior lights
- Check wiper blades
- Inspect steering components
- Inspect drive shaft boots
- Rotate tires and adjust air pressure
- Inspect external drive belts
- Check cooling system hoses
- Check and top off all fluid levels
- Inspect front and rear brakes
- Inspect suspension components
- Lube door hinges
|
Intermediate Service
We recommend at 15,000 mile increments
- Change engine oil and filter
- Check operation of exterior lights
- Check wiper blades
- Inspect steering components
- Inspect drive shafts and boots
- Rotate tires and adjust air pressure
- Inspect external drive belts
- Check coolant system hoses
- Inspect front and rear brakes
- Drain and fill transmission fluid
- Inspect and top off all fluid levels
- Inspect suspension components
- Service rear differential fluid
- Inspect exhaust system components
- Lube door hinges
|
Major Service
We recommend at 30,000 mile increments
- Change engine oil and filter
- Check operation of exterior lights
- Check wiper blades
- Flush brake fluid and replace
- Inspect steering components
- Inspect drive shafts and boots
- Rotate tires and adjust air pressure
- Inspect external drive belts
- Check coolant system hoses
- Inspect front and rear brakes
- Drain and fill transmission fluid
- Inspect and top off all fluid levels
- Replace spark plugs if applicable to model
- Inspect suspension components
- Service rear differential fluid (If equipped)
- Replace engine air filter
- Inspect exhaust system components
- Replace air conditioning filter(s)
- Inspect spare tire and air pressure
- Lube door hinges
- Replace distributor cap and distributor rotor (If equipped)
|
ADDITIONAL SERVICES
BG POWER STEERING SERVICE
Power steering systems produce high temperatures and extreme pressures from 800
to 200 pounds which leads to power steering fluid breakdown and failure. With BG
products power steering service, a cleaner dissolves gums and varnish in the power
steering pump, rack and pinion. This maintenance will lead to a quieter longer lasting
power steering system.
BG FUEL/AIR INDUCTION SYSTEM SERVICE
Carbon deposits over time will accumulate on the intake valves, intake ports
and in the fuel injectors causing rough idle, misfire, hesitation, loss of
power, hard starting and a loss of fuel mileage. With fuel/air induction
service, we will clean with special equipment the fuel injectors, throttle
body, plenum and air intake, intake valves and ports, remove combustion
chamber deposits and correct the balance of fuel and air in the system.
TRANSFUSION TRANSMISSION SERVICE
After 30,000 miles, transmission fluid begins to show its age as it turns brown 
in color and oxidizes due to the combination of time and heat. Deposits begin
to form around the transmissions numerous moving parts which could result in
valves that stick or gears that slip or are sluggish and chatter as they shift. Rather
than just removing the fluid from the bottom of the pan, the entire transmission
and torque converter have the old contaminated fluid removed and replenished
with new transmission fluid with the use of special equipment.
BRAKE FLUID FLUSH
Brake fluid becomes oxidized and contaminated over time and use. Heat and
moisture cause corrosion on parts and brake fluid failure. One of our highly
trained technicians will check the condition of your vehicle's brake system.
The entire brake system will be inspected for leaks, master cylinder
corrosion; worn pneumatic parts, varnish build up, worn rotors and drums.
The contaminated brake fluid will be flushed from system's brake lines and
master cylinder and brake fluid reservoir. Then the braking lines will be
purged of any air in the system.
COMING SOON MAINTENANCE MINDER SCHEDULE

|